Tool changer TC60-8

  • For robot payload 60 kg
  • Modular design
  • External signals
  • Wide range of media modules – simple to customize
Art.No: P1301A Categories: , ,
Tool changing ability for Tool changer TC60-8

The RSP tool changers are designed to maximize the flexibility and reliability of your robot fleet. They offer the possibility to enhance your robot application by allowing it to switch between different tools, such as grippers, weld units, fixtures etc. Tool changers from RSP are robust and can manage continuous changing operations with maintained reliability and safety. Depending on model and options, electrical signals, weld and servo power, data, water, and compressed air can be transferred from the robot side to the tool.

All our tool changers feature the patented locking device, TrueConnect™. It reduces play to the minimum and enables absolute alignment repeatability throughout its lifespan. With its unique design, it does not require exact alignment before docking with different tools. Find out more about the TrueConnect™ technology.

Mechanical interface

ISO 9409-1-80-6-M8

Robot payload

60 kg | 130 lb


± 600 N | ± 130 lb


± 500 Nm | ± 4400 lbf·in


± 600 Nm | ± 5300 lbf·in


1.8 kg | 3.97 lb


39 mm | 1.54 in

Centre of gravity (Z)

+ 26 mm

Air channels total


Air channels dedicated

2 (TC open and TC close)

Air channels available to tool


Air connection, inlet

G 1/8" (10x)

Max air pressure

10 bar | 145 psi

Air quality

Oil-clean and waterless filtered air, with max 25µm particle content

Signals total

Depending on chosen signal module

Working temperature

+10°C – +50°C | 50 °F – 120 °F


Electrical modules

Air/Water modules

Tool attachment