Tool changer TC350-8E (for air and electric signals)

  • For robot payload 350 kg
  • Compact design
  • Internal signal transmission
  • Minimum of wear of the contact surfaces
  • Optimized for material handling and tough environments

Art.No: P0603 Categories: ,
Tool changing ability for Tool changer TC350-8E

The RSP tool changers are designed to maximize the flexibility and reliability of your robot fleet. They offer the possibility to enhance your robot application by allowing it to switch between different tools, such as grippers, weld units, fixtures etc. Tool changers from RSP are robust and can manage continuous changing operations with maintained reliability and safety. Depending on model and options, electrical signals, weld and servo power, data, water, and compressed air can be transferred from the robot side to the tool.

All our tool changers feature the patented locking device, TrueConnect™. It reduces play to the minimum and enables absolute alignment repeatability throughout its lifespan. With its unique design, it does not require exact alignment before docking with different tools. Find out more about the TrueConnect™ technology.

Mechanical interface

ISO 9409-1-160-11-M12

Robot payload

350 kg | 800 lb


± 3500 N | ± 800 lb


± 3500 Nm | ± 31000 lbf·in


± 3500 Nm | ± 31000 lbf·in


10.5 kg | 23.15 lb


78 mm | 3.07 in

Air channels total


Air channels dedicated

2 (TC open and TC close)

Air channels available to tool


Max air pressure

10 bar | 145 psi

Air flow per channel

1600 l/min | 56.5 CFM

Air connection, inlet

G 1/4" (8x), G 1/8" (2x)

Air quality

Oil-clean and waterless filtered air, with max 25µm particle content

IP Class

IP 54

Signals total


Signals dedicated robot side

5 (GND, 0 V, 24 V, TC coupled and TC uncoupled)

Signals available to tool


Connection robot side

Souriau 23p Male

Rated current

2 A

Rated voltage

60 V

Working temperature

+10°C – +50°C | 50 °F – 120 °F

Tool attachment


Cables and connectors – Robot side


Shopping Cart
Scroll to Top