Large valve unit with 2x valves
P0045A- Large valve unit with two valves
- Built in connection box for I/O signals
- Standard ISO01 26mm IE interface
-
-
Large valve unit with 2x valves (for Tool changer)
P0044A- Large valve unit two valves
- One valve is dedicated for tool change
- The tool change valves shuts off the air to the other valves on tool change
- Built in connection box for I/O signals
- Standard ISO01 26mm IE interface
-
Large valve unit with 4x valves
P0042A- Large valve unit with four valves
- Built in connection box for I/O signals
- Standard ISO01 26mm IE interface
-
Large valve unit with 4x valves (for Tool changer)
P0041A- Large valve unit four valves
- One valve is dedicated for tool change
- The tool change valves shuts off the air to the other valves on tool change
- Built in connection box for I/O signals
- Standard ISO01 26mm IE interface
-
Large valve unit with 5x valves
P0067A- Large valve unit with five valves
- Built in connection box for I/O signals
- Standard ISO01 26mm IE interface
Replaces P0037A
-
Large valve unit with 5x valves (for Tool changer)
P0043A- Large valve unit five valves
- One valve is dedicated for tool change
- The tool change valves shuts off the air to the other valves on tool change
- Built in connection box for I/O signals
- Standard ISO01 26mm IE interface
-
Tool system CiRo XL for ABB IRB5720-125/3,0
TS141L-611This tool system is used when eight pneumatic channels and twelve electric signals are required. It consists of a CiRo, adaptation kit, hose package, valve units, connectors, cabling and hoses. The valve unit contains four bistable 5/2 valves.
Note! Connector only for IRC5 robot controller.
-
Tool system CiRo XL for ABB IRB5720-180/2,6
TS141-611This tool system is used when eight pneumatic channels and twelve electric signals are required. It consists of a CiRo, adaptation kit, hose package, valve units, connectors, cabling and hoses. The valve unit contains four bistable 5/2 valves.
Note! Connector only for IRC5 robot controller.
-
Tool system CiRo XL for ABB IRB6700-150/3,20 & 175/3,05
TS152L-611This tool system is used when eight pneumatic channels and twelve electric signals are required. It consists of a CiRo, adaptation kit, hose package, valve units, connectors, cabling and hoses. The valve unit contains four bistable 5/2 valves.
-
Tool system CiRo XL for ABB IRB6700-155/2,85
TS151L-611This tool system is used when eight pneumatic channels and twelve electric signals are required. It consists of a CiRo, adaptation kit, hose package, valve units, connectors, cabling and hoses. The valve unit contains four bistable 5/2 valves.
-
Tool system CiRo XL for ABB IRB6700-200/2,60
TS151-611This tool system is used when eight pneumatic channels and twelve electric signals are required. It consists of a CiRo, adaptation kit, hose package, valve units, connectors, cabling and hoses. The valve unit contains four bistable 5/2 valves.
-
Tool system CiRo XL for ABB IRB6700-235/2,65 & 205/2,80
TS152-611This tool system is used when eight pneumatic channels and twelve electric signals are required. It consists of a CiRo, adaptation kit, hose package, valve units, connectors, cabling and hoses. The valve unit contains four bistable 5/2 valves.
-
Tool system CiRo XL for ABB IRB6700-245/3,00
TS153L-611This tool system is used when eight pneumatic channels and twelve electric signals are required. It consists of a CiRo, adaptation kit, hose package, valve units, connectors, cabling and hoses. The valve unit contains four bistable 5/2 valves.
-
Tool system CiRo XL for ABB IRB6700-300/2,70
TS153-611This tool system is used when eight pneumatic channels and twelve electric signals are required. It consists of a CiRo, adaptation kit, hose package, valve units, connectors, cabling and hoses. The valve unit contains four bistable 5/2 valves.
-
Tool system S250-8E for ABB IRB6700-150/3,20 & 175/3,05
TS152L-604This tool system is used when eight pneumatic channels and 17 electric signals are required. It consists of a swivel, adaptation kit, hose package, valve unit and cabling. The valve unit contains four directional bi-stable 5/2 valves and the hose package totally contains eight air hoses.
-
Tool system S250-8E for ABB IRB6700-155/2,85
TS151L-604This tool system is used when eight pneumatic channels and 17 electric signals are required. It consists of a swivel, adaptation kit, hose package, valve unit and cabling. The valve unit contains four directional bi-stable 5/2 valves and the hose package totally contains eight air hoses.
-
Tool system S250-8E for ABB IRB6700-200/2,60
TS151-604This tool system is used when eight pneumatic channels and 17 electric signals are required. It consists of a swivel, adaptation kit, hose package, valve unit and cabling. The valve unit contains four directional bi-stable 5/2 valves and the hose package totally contains eight air hoses.
-
Tool system S250-8E for ABB IRB6700-235/2,65 & 205/2,80
TS152-604This tool system is used when eight pneumatic channels and 17 electric signals are required. It consists of a swivel, adaptation kit, hose package, valve unit and cabling. The valve unit contains four directional bi-stable 5/2 valves and the hose package totally contains eight air hoses.
-
Tool system S250-8E for ABB IRB6700-245/3,00
TS153L-604This tool system is used when eight pneumatic channels and 17 electric signals are required. It consists of a swivel, adaptation kit, hose package, valve unit and cabling. The valve unit contains four directional bi-stable 5/2 valves and the hose package totally contains eight air hoses.
-
Tool system S250-8E for ABB IRB6700-300/2,70
TS153-604This tool system is used when eight pneumatic channels and 17 electric signals are required. It consists of a swivel, adaptation kit, hose package, valve unit and cabling. The valve unit contains four directional bi-stable 5/2 valves and the hose package totally contains eight air hoses.
-
Tool System STC250-6E for ABB IRB5720-125/3,0
TS141L-602This tool system is used when tool changing capability, six pneumatic channels and 18 electric signals are required. It consists of a swivel tool changer, adaptation kit, hose package, valve unit and cabling. The valve unit contains three directional (bi-stable 5/2) valves and one tool change (2×3/2-NO/NC) valve. The hose package totally contains eight air hoses.
Note! Connector only for IRC5 robot controller.
-
Tool System STC250-6E for ABB IRB5720-180/2,6
TS141-602This tool system is used when tool changing capability, six pneumatic channels and 18 electric signals are required. It consists of a swivel tool changer, adaptation kit, hose package, valve unit and cabling. The valve unit contains three directional (bi-stable 5/2) valves and one tool change (2×3/2-NO/NC) valve. The hose package totally contains eight air hoses.
Note! Connector only for IRC5 robot controller.
-
Tool system STC250-6E for ABB IRB6700-150/3,20 & 175/3,05
TS152L-602This tool system is used when tool changing capability, six pneumatic channels and 12 electric signals are required. It consists of a swivel tool changer, adaptation kit, hose package, valve unit and cabling. The valve unit contains three directional (bi-stable 5/2) valves and one tool change (2×3/2-NO/NC) valve. The hose package totally contains eight air hoses.
-
Tool system STC250-6E for ABB IRB6700-155/2,85
TS151L-602This tool system is used when tool changing capability, six pneumatic channels and 12 electric signals are required. It consists of a swivel tool changer, adaptation kit, hose package, valve unit and cabling. The valve unit contains three directional (bi-stable 5/2) valves and one tool change (2×3/2-NO/NC) valve. The hose package totally contains eight air hoses.
-
Tool system STC250-6E for ABB IRB6700-200/2,60
TS151-602This tool system is used when tool changing capability, six pneumatic channels and 12 electric signals are required. It consists of a swivel tool changer, adaptation kit, hose package, valve unit and cabling. The valve unit contains three directional (bi-stable 5/2) valves and one tool change (2×3/2-NO/NC) valve. The hose package totally contains eight air hoses.
-
Tool system STC250-6E for ABB IRB6700-235/2,65 & 205/2,80
TS152-602This tool system is used when tool changing capability, six pneumatic channels and 12 electric signals are required. It consists of a swivel tool changer, adaptation kit, hose package, valve unit and cabling. The valve unit contains three directional (bi-stable 5/2) valves and one tool change (2×3/2-NO/NC) valve. The hose package totally contains eight air hoses.
-
Tool system STC250-6E for ABB IRB6700-245/3,00
TS153L-602This tool system is used when tool changing capability, six pneumatic channels and 12 electric signals are required. It consists of a swivel tool changer, adaptation kit, hose package, valve unit and cabling. The valve unit contains three directional (bi-stable 5/2) valves and one tool change (2×3/2-NO/NC) valve. The hose package totally contains eight air hoses.
-
Tool system STC250-6E for ABB IRB6700-300/2,70
TS153-602This tool system is used when tool changing capability, six pneumatic channels and 12 electric signals are required. It consists of a swivel tool changer, adaptation kit, hose package, valve unit and cabling. The valve unit contains three directional (bi-stable 5/2) valves and one tool change (2×3/2-NO/NC) valve. The hose package totally contains eight air hoses.