TC60/TC120/TC180 Air module 4 x 3/8″
P1325-4Module for 4 x aditional air channels. To be used with Modular tool changers TC60/TC120/TC180.
-
-
TC60/TC120/TC180 Air module 6 x 1/8″
P1397Module for 6 x aditional air channels. To be used with Modular tool changers TC60/TC120/TC180.
-
TC60/TC120/TC180 Bus module (2 x M12 D-coded)
P1368Module for Bus. To be used with Modular tool changers TC60/TC120/TC180.
-
TC60/TC120/TC180 Bus module DeviceNet
P1328Module for Bus, DeviceNet. To be used with Modular tool changers TC60/TC120/TC180.
-
TC60/TC120/TC180 Bus module Ethernet IP
P1340Module for Bus, Ethernet IP. To be used with Modular tool changers TC60/TC120/TC180.
-
TC60/TC120/TC180 Bus module Profinet (M12)
P1346Module for Bus, Profinet. To be used with Modular tool changers TC60/TC120/TC180.
-
TC60/TC120/TC180 High Voltage module
P1322Transfers 2 high voltage power signals. To be used with Modular tool changers TC60/TC120/TC180. Option P1314, are recommended for improved alignment at
docking when using P1322. -
TC60/TC120/TC180 Power module 8 x power
P1307Module for 8 x aditional power. To be used with Modular tool changers TC60/TC120/TC180.
-
TC60/TC120/TC180 Power module 8 x power, 10 m cable, Free end
P3312-100Module for 8 x aditional power. To be used with Modular tool changers TC60/TC120/TC180.
-
TC60/TC120/TC180 Power module 8 x power, 8 m cable, Free end
P3312-80Module for 8 x aditional power. To be used with Modular tool changers TC60/TC120/TC180.
-
TC60/TC120/TC180 Power module 8 x signals
P1375Module for servo/power. To be used with Modular tool changers TC60/TC120/TC180.
-
TC60/TC120/TC180 Sensors module for TC open/close
P3338Important! This is a module for TC open/close only. To be used with Modular tool changers TC60, TC120 and TC180.
This module has no corresponding TA module.
-
TC60/TC120/TC180 Signal module 12 x signals
P1305Module for 12 x additional signals. To be used with Modular tool changers TC60/TC120/TC180.
-
TC60/TC120/TC180 Signal module 12 x signals
P1371Module for 12 x aditional signals. To be used with Modular tool changers TC60, TC120 and TC180.
-
TC60/TC120/TC180 Signal module 12 x signals (3xM8)
P1381Module for 12 x aditional signals. To be used with Modular tool changers TC60/TC120/TC180.
-
TC60/TC120/TC180 Signal module 12 x signals, with socket connection
P1354Module for 12 x aditional signals. To be used with Modular tool changers TC60/TC120/TC180.
-
TC60/TC120/TC180 Signal module 17 x signals
P1311Module for 17 x additional signals. To be used with Modular tool changers TC60/TC120/TC180.
-
TC60/TC120/TC180 Signal module 19 x signals
P1389Module for 19 x aditional signals. To be used with Modular tool changers TC60, TC120 and TC180.
-
TC60/TC120/TC180 Signal module 2 x 9 signals, with socket connection
P1356Transfers 18 electrical signals to the tool. To be used with Modular tool changers TC60/TC120/TC180.
-
TC60/TC120/TC180 Signal module 30 x signals (for TC sensors)
P1338Module for 30 x aditional signals. To be used with Modular tool changers TC60/TC120/TC180.
-
TC60/TC120/TC180 Signal module 4 signals + Profinet
P1399Module for 4 electrical and 4 fieldbus signals. To be used with Modular tool changers TC60/TC120/TC180.
-
TC60/TC120/TC180 Signal module 8 x signals (for TC sensors)
P1344Module for 8 x aditional signals. To be used with Modular tool changers TC60/TC120/TC180.
-
TC60/TC120/TC180 Signal module M12 D-coded + M12 L-coded
P3316Module for 4 power and 4 bus signals. To be used with Modular tool changers TC60/TC120/TC180.
-
TC60/TC120/TC180 Signal Module with (3 ×) M8 & M23
P3328Signal module for Modular TC60, TC120 and TC180 with three M8 connectors and an M23 (19-pin) connector.
For secure and flexible signal transfer between robot and tool.
-
TC720 magnetic sensors open/close M8 for KUKA
P7293To be used together with tool changer TC720 for KUKA
-
TC720 magnetic sensors open/close M8, (only for gen 3 tool changers)
P7174To be used together with tool changer TC720 gen 3
-
TC960 magnetic sensors open/close M8, (only for gen 3 tool changers)
P7175To be used together with tool changer TC960 gen 3
-
Tool Attachement TA240-1 ø125-10-M10 Prepared for safety
P7721- Prepered for safety
- Modular design
- External signals
- Wide range of media modules – simple to customize
- Designed to meet bodyshop application demands
Important! This unit includes our new generation air/water coupling. This is NOT compatible with the older version tool changer. If you need to retrofit, please contact support@robotsystemproducts.com
-
Tool Attachement TA240-1 ø125-6-M10
P7331- Modular design
- External signals
- Wide range of media modules – simple to customize
- Designed to meet bodyshop application demands
Important! This unit includes our new generation air/water coupling. This is NOT compatible with the older version tool changer. If you need to retrofit, please contact support@robotsystemproducts.com
-
Tool Attachement TA480-1 ø160-10-M10
P7335- Modular design
- External signals
- Wide range of media modules – simple to customize
- Designed to meet bodyshop application demands
Important! This unit includes our new generation air/water coupling. This is NOT compatible with the older version tool changer. If you need to retrofit, please contact support@robotsystemproducts.com