TA60-180 Air module 2 x 3/8″
P1326Module for 2 x aditional air channels. To be used with TA60-180 tool attachments.
-
-
TA60-180 Air module 4 x 3/8″
P1326-4Module for 4 x aditional air channels. To be used with TA60-180 tool attachments.
-
TA60-180 Air module 6 x 1/8″
P1398Module for 6 x aditional air channels. To be used with TA60-180 tool attachments.
-
TA60/TA120/TA180 Bus module (2 x M12 D-coded)
P1369Module for Bus. To be used with TA60-180 tool changers.
Note: The electrical module protrudes 1.6 mm below the tool flange. An adapter plate may be required for installation.
-
TA60/TA120/TA180 Bus module DeviceNet
P1329Module for Bus, DeviceNet. To be used with TA60-180 tool changers.
-
TA60/TA120/TA180 Bus module Ethernet IP
P1341Module for Bus, Ethernet IP. To be used with TA60-180 tool changers.
-
TA60/TA120/TA180 Bus module Profinet (M12)
P1347Module for Bus, Profinet. To be used with TA60-180 tool changers.
-
TA60/TA120/TA180 High Voltage module
P1323Transfers 2 high voltage power signals. To be used with TA60/TA120/TA180 tool attachments.
-
TA60/TA120/TA180 Power module 8 x power
P1308Module for 8 x aditional power. To be used with TA60-180 tool changers.
-
TA60/TA120/TA180 Power module 8 x power, dual connectors, 1 m cable
P3313-10Module for 8 x aditional power. To be used with TA60-180 tool changers.
Note: The electrical module protrudes 1.6 mm below the tool flange. An adapter plate may be required for installation.
-
TA60/TA120/TA180 Power module 8 x power, dual connectors, 8 m cable
P3313-80Module for 8 x aditional power. To be used with TA60-180 tool changers.
Note: The electrical module protrudes 1.6 mm below the tool flange. An adapter plate may be required for installation.
-
TA60/TA120/TA180 Servo/Power module 8 x signals
P1376Module for 8 x aditional servo/power signals. To be used with TA60, TA120 and TA180 tool attachments.
Note: The electrical module protrudes 1.6 mm below the tool flange. An adapter plate may be required for installation.
-
TA60/TA120/TA180 Signal module 4 signals (M8 4S) + Profinet (M12 4P)
P3308Module for 4 electrical and 4 fieldbus signals. To be used with TA60-180 tool changers.
-
TA60/TA120/TA180 Signal module 4 signals (M8 4S) + Profinet (M12 4S)
P3301Module for 4 electrical and 4 fieldbus signals. To be used with TA60-180 tool changers.
-
TA60/TA120/TA180 Signal module 12 signals – Souriau/M8
P1370Module for 12 x aditional signals. To be used with TA60, TA120 and TA180 tool attachments.
-
TA60/TA120/TA180 Signal module 12 x signals
P1306Module for 12 x aditional signals. To be used with TA60-180 tool changers.
-
TA60/TA120/TA180 Signal module 12 x signals (3xM8-4P)
P1382Module for 12 x aditional signals. To be used with TA60-180 tool changers.
-
TA60/TA120/TA180 Signal module 12 x signals, with pin connection
P1355Module for 12 x aditional signals. To be used with TA60-180 tool changers.
Note: The electrical module protrudes 1.6 mm below the tool flange. An adapter plate may be required for installation.
-
TA60/TA120/TA180 Signal module 17 x signals
P1312Module for 15 x aditional signals. To be used with TA60-180 tool changers.
-
TA60/TA120/TA180 Signal module 19 signals
P1390Module for 19 x aditional signals. To be used with TA60, TA120 and TA180 tool attachments.
Note: The electrical module protrudes 1.6 mm below the tool flange. An adapter plate may be required for installation.
-
TA60/TA120/TA180 Signal module 19 signals, open end
P3324Module for 19 x aditional signals. To be used with TA60, TA120 and TA180 tool attachments.
Note 1: No signal on pin 9 togehter with module P3328
Note 2: The electrical module protrudes 1.6 mm below the tool flange. An adapter plate may be required for installation.
-
TA60/TA120/TA180 Signal module 2 x 9 signals, Female thread connectors
P1374This module has female threaded connectors and transfers 18 signals. To be used with TA60-180 tool attachments.
Note: The electrical module protrudes 1.6 mm below the tool flange. An adapter plate may be required for installation.
-
TA60/TA120/TA180 Signal module 2 x 9 signals, Male thread connectors
P1357Transfers 18 signals. To be used with TA60-180 tool attachments.
Note: The electrical module protrudes 1.6 mm below the tool flange. An adapter plate may be required for installation.
-
TA60/TA120/TA180 Signal module 30 x signals
P1339Module for 30 x aditional signals. To be used with TA60-180 tool changers.
-
TA60/TA120/TA180 Signal module 30 x signals, Souriau connector
P1378Module for 30 x aditional signals. To be used with TA60-180 tool changers.
-
TA60/TA120/TA180 Signal module 8 x signals
P1345Module for 6 x additional signals. To be used with TA60-180 tool changers.
-
TA60/TA120/TA180 Signal module M12 4S + M12 4P
P3315Module for 4 electrical and 4 bus signals. To be used with TA60-180 tool changers.
-
TA60/TA120/TA180 Signal module M12 connector 17 x signals
P1332Module for 17 x aditional signals. To be used with TA60-180 tool changers.
-
TA60/TA120/TA180 Signal module M12 D-coded + M12 L-coded
P3317Module for 4 power and 4 bus signals. To be used with TA60-180 tool changers.
Note: The electrical module protrudes 1.6 mm below the tool flange. An adapter plate may be required for installation.
-
TC empty inductive sensor
P7145-1For extra tool changer safety. To be used together with tool changer TC240, TC480, TC720 and TC960.