Extended small valve unit with 2x valves
P0035- Extended small valve unit with two valves
- Built in connection box for I/O signals
- Standard ISO15407-2 18mm IE interface
-
-
Extended small valve unit with 2x valves (for tool change)
P0027- Extended small valve unit two valves
- One valve is dedicated for tool change
- The tool change valve shuts off the air to the other valves on tool change
- Built in connection box for I/O signals
- Standard ISO15407-2 18mm IE interface
-
Extended small valve unit with 4x valves
P0036- Extended small valve unit with four valves
- Built in connection box for I/O signals
- Standard ISO15407-2 18mm IE interface
-
Extended small valve unit with 4x valves (for tool change)
P0028- Extended small valve unit four valves
- One valve is dedicated for tool change
- The tool change valve shuts off the air to the other valves on tool change
- Built in connection box for I/O signals
- Standard ISO15407-2 18mm IE interface
-
Extended small valve unit with 5x valves (for tool change)
P0029- Extended small valve unit five valves
- One valve is dedicated for tool change
- The tool change valve shuts off the air to the other valves on tool change
- Built in connection box for I/O signals
- Standard ISO15407-2 18mm IE interface
-
Extended small valve unit without valves
P0026- Extended small valve for up to five valves
- Built in connection box for I/O signals
- Fits standard ISO15407-2 18mm IE interface
-
Swivel S250-8E ALU
P6304- For robot payload 250 kg
- Aluminum housing
- Allows continuous rotation of axis 6
- Increased mobility
- Reduces hose package interference
- Maximizes hose package lifetime
The new S250 models are fully compatible with the older version.
-
Swivel S250-8ES ALU (sealed)
P6307- For robot payload 250 kg
- Aluminum housing
- Allows continuous rotation of axis 6
- Increased mobility
- Reduces hose package interference
- Maximizes hose package lifetime
The new S250 models are fully compatible with the older version.
-
Swivel S350-1E
P0633- For robot payload 350 kg
- Allows continuous rotation of axis 6
- Increased mobility
- Reduces hose package interference
- Maximizes hose package lifetime
-
Swivel S350-8E
P0610- For robot payload 350 kg
- Allows continuous rotation of axis 6
- Increased mobility
- Reduces hose package interference
- Maximizes hose package lifetime
-
Swivel S350-8E 26p connector
P1617- For robot payload 350 kg
- Allows continuous rotation of axis 6
- Increased mobility
- Reduces hose package interference
- Maximizes hose package lifetime
-
Swivel S350-8ES (sealed)
P1613A- For robot payload 350 kg
- Allows continuous rotation of axis 6
- Increased mobility
- Reduces hose package interference
- Maximizes hose package lifetime
-
Swivel Tool Changer STC250-6E ALU
P6306- For robot payload 250 kg
- Allows continuous rotation of axis 6
- Increased mobility
- Reduces hose package interference
- Maximizes hose package lifetime
-
Swivel Tool Changer STC250-6ES (Sealed)
P6458- For robot payload 250 kg
- Allows continuous rotation of axis 6
- Increased mobility
- Reduces hose package interference
- Maximizes hose package lifetime
-
Swivel Tool Changer STC350-6E
P0607- For robot payload 350 kg
- Allows continuous rotation of axis 6
- Increased mobility
- Reduces hose package interference
- Maximizes hose package lifetime
-
TA240-960 Signal module 17 x signals
P6739Module for 19 x aditional signals. To be used with TA240 – TA960 tool attachments.
-
TA240-960 Signal module 19 x signals
P7225Module for 19 x aditional signals. To be used with TA240 – TA960 tool attachments.
-
TA240-960 Signal module 23 x signals
P6721Module for 23 x aditional signals. To be used with TA240 – TA960 tool attachments.
-
TA60/TA120/TA180 Signal module 12 x signals, with pin connection
P1355Module for 12 x aditional signals. To be used with TA60-180 tool changers.
Note: The electrical module protrudes 1.6 mm below the tool flange. An adapter plate may be required for installation.
-
TC240-960 Signal module 17 x signals (3 x M8 connectors)
P6738-1Module for 17 x aditional signals. To be used with Moduflex tool changers TC240 – TC960.
-
TC240-960 Signal module 19 x signals (Souriau 26P + 3 x M8)
P7224Module for 19 x aditional signals. To be used with Moduflex tool changers TC240 – TC960.
-
TC240-960 Signal module 23 x signals
P6711Module for 23 x aditional signals. To be used with Moduflex tool changers TC240 – TC960.
-
TC60/TC120/TC180 Signal module 12 x signals, with socket connection
P1354Module for 12 x aditional signals. To be used with Modular tool changers TC60/TC120/TC180.
-
Tool attachment TA100-8E (square) with 1 m cable
P0404For attachment of tool when using a tool changer TC100 or swivel tool changer STC100
-
Tool attachment TA100-8E with 1 m cable
P0409For attachment of tool when using a tool changer TC100 or swivel tool changer STC100
-
Tool attachment TA100-8E with 4 x M12 connectors
P0418For attachment of tool when using a tool changer TC100 or a swivel tool changer STC100
-
Tool attachment TA250-8E, (square) 19 signals with 1 m cable
P6473For attachment of tool when using a tool changer TC250 or a swivel tool changer STC250
-
Tool attachment TA250-8E, 19 signals
P6418For attachment of tool when using a tool changer TC250 or a swivel tool changer STC250
-
Tool attachment TA250-8E, 19 signals with 1 m cable
P6431For attachment of tool when using a tool changer TC250 or a swivel tool changer STC250
-
Tool attachment TA350-8E (for air and electric)
P0608For attachment of tool when using a tool changer TC350 or a swivel tool changer STC350