TA60/TA120/TA180 Signal module 30 x signals
P1339Module for 30 x aditional signals. To be used with TA60-180 tool changers.
-
-
TA60/TA120/TA180 Signal module 30 x signals, Souriau connector
P1378Module for 30 x aditional signals. To be used with TA60-180 tool changers.
-
TA60/TA120/TA180 Signal module 8 x signals
P1345Module for 12 x aditional signals. To be used with TA60-180 tool changers.
-
TA60/TA120/TA180 Signal module M12 connector 17 x signals
P1332Module for 17 x aditional signals. To be used with TA60-180 tool changers.
-
TC20 signal module 12 x signals
P1131Module for 12 x aditional signals. To be used with TC20 tool changers.
-
TC20 Signal module 8 x signals
P1113Module for 8 x aditional signals. To be used with TC20 tool changers.
-
TC240-960 Bus module, Profinet
P6771Bus module for Profinet. To be used with Moduflex tool changers TC240 – TC960.
-
TC5 Signal module 8 x signals
P1013Module for 8 x aditional signals. To be used with TC5 tool changers.
-
TC5-6E Signal module 8 x signals (M12, 8 pin)
P1015Module for 8 x aditional signals. To be used with TC5 tool changers.
-
TC5-6E Signal module 8 x signals (no filler)
P1035Module for 8 x aditional signals. To be used with TC5 tool changers.
-
TC60/TC120/TC180 Bus module (2 x M12 D-coded)
P1368Module for Bus. To be used with Modular tool changers TC60/TC120/TC180.
-
TC60/TC120/TC180 Bus module DeviceNet
P1328Module for Bus, DeviceNet. To be used with Modular tool changers TC60/TC120/TC180.
-
TC60/TC120/TC180 Bus module Ethernet IP
P1340Module for Bus, Ethernet IP. To be used with Modular tool changers TC60/TC120/TC180.
-
TC60/TC120/TC180 Bus module Profinet (M12)
P1346Module for Bus, Profinet. To be used with Modular tool changers TC60/TC120/TC180.
-
TC60/TC120/TC180 Signal module 12 x signals
P1305Module for 12 x aditional signals. To be used with Modular tool changers TC60/TC120/TC180.
-
TC60/TC120/TC180 Signal module 12 x signals
P1371Module for 12 x aditional signals. To be used with Modular tool changers TC60, TC120 and TC180.
-
TC60/TC120/TC180 Signal module 12 x signals (3xM8)
P1381Module for 12 x aditional signals. To be used with Modular tool changers TC60/TC120/TC180.
-
TC60/TC120/TC180 Signal module 17 x signals
P1311Module for 15 x aditional signals. To be used with Modular tool changers TC60/TC120/TC180.
-
TC60/TC120/TC180 Signal module 30 x signals (for TC sensors)
P1338Module for 30 x aditional signals. To be used with Modular tool changers TC60/TC120/TC180.
-
TC60/TC120/TC180 Signal module 8 x signals (for TC sensors)
P1344Module for 12 x aditional signals. To be used with Modular tool changers TC60/TC120/TC180.
-
Tool system S100-4E for ABB IRB4600-40
TS131-406This tool system is used when 4 pneumatic channels and 12 electric signals are required. It consists of a swivel, adaptation kit, hose package, valve unit and cabling. The valve unit contains two directional (mono-stable 5/2) valves. The hose package contains four air hoses in total.
-
Tool system S100-4E for ABB IRB4600-45/60
TS132-406This tool system is used when 4 pneumatic channels and 12 electric signals are required. It consists of a swivel, adaptation kit, hose package, valve unit and cabling. The valve unit contains two directional (mono-stable 5/2) valves. The hose package contains four air hoses in total.
-
Tool system S100-8E for ABB IRB4600-40
TS131-408This tool system is used when 8 pneumatic channels and 12 electric signals are required. It consists of a swivel, adaptation kit, hose package, valve unit and cabling. The valve unit contains four directional (mono-stable 5/2) valves. The hose package contains 8 air hoses in total.
-
Tool system S100-8E for ABB IRB4600-45/60
TS132-408This tool system is used when 8 pneumatic channels and 12 electric signals are required. It consists of a swivel, adaptation kit, hose package, valve unit and cabling. The valve unit contains four directional (mono-stable 5/2) valves. The hose package contains 8 air hoses in total.
-
Tool system STC100-2E for ABB IRB4600-40
TS131-402This tool system is used when tool changing capability, 2 pneumatic channels and 8 electric signals are required. It consists of a swivel tool changer, adaptation kit, hose package, valve unit and cabling. The valve unit contains one directional (mono-stable 5/2) valve and one tool change (monostable 2×3/2) valve. The hose package contains four air hoses in total.
-
Tool system STC100-2E for ABB IRB4600-45/60
TS132-402This tool system is used when tool changing capability, 2 pneumatic channels and 8 electric signals are required. It consists of a swivel tool changer, adaptation kit, hose package, valve unit and cabling. The valve unit contains one directional (mono-stable 5/2) valve and one tool change (monostable 2×3/2) valve. The hose package contains four air hoses in total.
-
Tool system STC100-6E for ABB IRB4600-40
TS131-404This tool system is used when tool changing capability, 6 pneumatic channels and 8 electric signals are required. It consists of a swivel tool changer, adaptation kit, hose package, valve unit and cabling. The valve unit contains 3 directional (mono-stable 5/2) valves and one tool change (monostable 2×3/2) valve. The hose package contains eight air hoses in total.
-
Tool system STC100-6E for ABB IRB4600-45/60
TS132-404This tool system is used when tool changing capability, 6 pneumatic channels and 8 electric signals are required. It consists of a swivel tool changer, adaptation kit, hose package, valve unit and cabling. The valve unit contains 3 directional (mono-stable 5/2) valves and one tool change (monostable 2×3/2) valve. The hose package contains eight air hoses in total.
-
Tool system STC20-4E for ABB IRB1300-10/1,15 & -11/0,9
TS103-202This tool system is used when tool changing capability, 2 pneumatic channels and 8 electric signals are required. It consists of a swivel tool changer STC20-4E, adaptation kit, hose package, valve unit and cable. The valve unit has two monostable 5/2 valves and the hose package contains 2 air hoses.
-
Tool system STC20-4E for ABB IRB2600-1,65/1,85
TS104-202This tool system is used when tool changing capability, 4 pneumatic channels and 8 electric signals are required. It consists of a swivel tool changer STC20-4E, adaptation kit, hose package, valve unit and cable. The valve unit has three monostable 5/2 valves and the hose package contains 4 air hoses.