Tool changer TC5-6

  • For robot payload 5 kg
  • Modular design
  • External signals
  • Wide range of media modules – simple to customize
Art.No: P1001 Categories: , ,
Tool changing ability for Tool changer TC5-6

The RSP tool changers are designed to maximize the flexibility and reliability of your robot fleet. They offer the possibility to enhance your robot application by allowing it to switch between different tools, such as grippers, weld units, fixtures etc. Tool changers from RSP are robust and can manage continuous changing operations with maintained reliability and safety. Depending on model and options, electrical signals, weld and servo power, data, water, and compressed air can be transferred from the robot side to the tool.

All our tool changers feature the patented locking device, TrueConnect™. It reduces play to the minimum and enables absolute alignment repeatability throughout its lifespan. With its unique design, it does not require exact alignment before docking with different tools. Find out more about the TrueConnect™ technology.

Mechanical interface

ISO 9409-1-31.5-4-M5
Robot payload

5 kg | 11 lb
Fz

± 50 N | ± 11 lb
Mz

± 50 Nm | ± 450 lbf·in
Mx/My

± 50 Nm | ± 450 lbf·in
Weight

0.23 kg | 0.51 lb
Height

25 mm | 0.98 in
Centre of gravity (Z)

+ 16 mm
Air channels total

8
Air channels dedicated

2 (TC open and TC close)
Air channels available to tool

6
Air connection, inlet

M5 (8x)
Max air pressure

10 bar | 145 psi
Air quality

Oil-clean and waterless filtered air, with max 25µm particle content
Signals total

Depending on chosen signal module
Working temperature

+10°C – +50°C | 50 °F – 120 °F

Modules

Electrical modules
Air/Water modules

Tool attachment

Downloads

Related products