Tool attachment TA5-6

For attachment of tool when using a tool changer TC5

Art.No: P1002 Categories: , , ,
Tool changing ability

The RSP tool changers are designed to maximize the flexibility and reliability of your robot fleet. They offer the possibility to enhance your robot application by allowing it to switch between different tools, such as grippers, weld units, fixtures etc. Tool changers from RSP are robust and can manage continuous changing operations with maintained reliability and safety. Depending on model and options, electrical signals, weld and servo power, data, water, and compressed air can be transferred from the robot side to the tool.

All our tool changers feature the patented locking device, TrueConnect™. It reduces play to the minimum and enables absolute alignment repeatability throughout its lifespan. With its unique design, it does not require exact alignment before docking with different tools.

Mechanical interface

ISO 9409-1-31.5-4-M5

Robot payload

5 kg | 11 lb


± 50 N | ± 11 lb


± 50 Nm | ± 450 lbf·in


± 50 Nm | ± 450 lbf·in


0.06 kg | 0.13 lb


12 mm | 0.47 in

Air channels available to tool


Air connection, outlet

M5 (6x)

Air flow per channel

100 l/min | 3.5 CFM

Max air pressure

10 bar | 145 psi

Air quality

Oil-clean and waterless filtered air, with max 25µm particle content

Working temperature

+10°C – +50°C | 50 °F – 120 °F


Electrical modules

Air/Water modules

For tool changer