Tool attachment TA120-8

For attachment of tool when using a tool changer TC120

Art.No: P1402 Categories: , , ,
Tool changing ability

The RSP tool changers are designed to maximize the flexibility and reliability of your robot fleet. They offer the possibility to enhance your robot application by allowing it to switch between different tools, such as grippers, weld units, fixtures etc. Tool changers from RSP are robust and can manage continuous changing operations with maintained reliability and safety. Depending on model and options, electrical signals, weld and servo power, data, water, and compressed air can be transferred from the robot side to the tool.

All our tool changers feature the patented locking device, TrueConnect™. It reduces play to the minimum and enables absolute alignment repeatability throughout its lifespan. With its unique design, it does not require exact alignment before docking with different tools.

Mechanical interface

ISO 9409-1-100-6-M10
Robot payload

120 kg | 260 lb
Fz

± 1000 N | ± 220 lb
Mz

± 1000 Nm | ± 8800 lbf·in
Mx/My

± 1000 Nm | ± 8800 lbf·in
Weight

1.4 kg | 3.1 lb
Height

24 mm | 0.94 in
Air channels available to tool

8
Air connection, outlet

G 1/8" (8x)
Air flow per channel

800 l/min | 28.28 CFM
Max air pressure

10 bar | 145 psi
Air quality

Oil-clean and waterless filtered air, with max 25µm particle content
Working temperature

+10°C – +50°C | 50 °F – 120 °F

Modules

Electrical modules
Air/Water modules

Options

For Tool changer

Downloads

Related products