Tool changer TC120-8

  • For robot payload 120 kg
  • Modular design
  • External signals
  • Wide range of media modules – simple to customize
Art.No: P1401 Categories: , ,
Tool changing ability for Tool changer TC120-8

The RSP tool changers are designed to maximize the flexibility and reliability of your robot fleet. They offer the possibility to enhance your robot application by allowing it to switch between different tools, such as grippers, weld units, fixtures etc. Tool changers from RSP are robust and can manage continuous changing operations with maintained reliability and safety. Depending on model and options, electrical signals, weld and servo power, data, water, and compressed air can be transferred from the robot side to the tool.

All our tool changers feature the patented locking device, TrueConnect™. It reduces play to the minimum and enables absolute alignment repeatability throughout its lifespan. With its unique design, it does not require exact alignment before docking with different tools. Find out more about the TrueConnect™ technology.

Mechanical interface

ISO 9409-1-100-6-M10
Robot payload

120 kg | 260 lb
Working temperature

+10°C – +50°C | 50 °F – 120 °F
Fz

± 1000 N | ± 220 lb
Mz

± 1000 Nm | ± 8800 lbf·in
Mx/My

± 1000 Nm | ± 8800 lbf·in
Weight

2.3 kg | 5.07 lb
Height

42 mm | 1.65 in
Air channels total

10
Air channels dedicated

2 (TC open and TC close)
Air channels available to tool

8
Max air pressure

10 bar | 145 psi
Air connection, inlet

G 1/8" (10x)
Air quality

Oil-clean and waterless filtered air, with max 25µm particle content
Signals total

Depending on chosen signal module

Modules

Electrical modules
Air/Water modules

Options

Tool attachment

Downloads

Related products