Adaptation kit to S/STC20 for Fanuc M-710IC/20L
€0 P0477Complete adaptation kit for installation of S/STC20 on Fanuc M-710IC/20L robot.
-
-
Adaptation kit to S/STC20 for Kuka KR6
€0 P0158Complete adaptation kit for installation of S/STC20 on Kuka KR6 robot.
-
CoboShift – Tool attachment ATA18
€0 P1182CoboShift Tool Attachment for automatic tool changer ATC18
- 18 kg payload capacity
- Locked by TrueConnect™
Select options This product has multiple variants. The options may be chosen on the product page -
CoboShift Vacuum module – Robot Side
€0 P1197Module for 1 x aditional air channels. To be used with CoboShift ATC/MTC tool changers.
-
CoboShift Vacuum module – Tool side
€0 P1198Module for 1 x aditional air channels. To be used with CoboShift ATA/MTA tool attachments.
-
-
-
Hose clamp with flexible mounting for NW23 (Ø110 – Ø150 mm)
€0 P8238-3- Mounting suitable for Ø110 – Ø150 mm
- Fits NW23 tubing
-
Hose clamp with flexible mounting for NW23 (Ø70 – Ø90 mm)
€0 P8238-1- Mounting suitable for Ø70 – Ø90 mm
- Fits NW23 tubing
-
Hose clamp with flexible mounting for NW23 (Ø90 – Ø110 mm)
€0 P8238-2- Mounting suitable for Ø90 – Ø110 mm
- Fits NW23 tubing
-
Hose clamp with flexible mounting for NW29 (Ø110 – Ø150 mm)
€0 P8239-3- Mounting suitable for Ø110 – Ø150 mm
- Fits NW29 tubing
-
Hose clamp with flexible mounting for NW29 (Ø70 – Ø90 mm)
€0 P8239-1- Mounting suitable for Ø70 – Ø90 mm
- Fits NW29 tubing
-
Hose clamp with flexible mounting for NW29 (Ø90 – Ø110 mm)
€0 P8239-2- Mounting suitable for Ø90 – Ø110 mm
- Fits NW29 tubing
-
-
-
-
TA60-180 Air module 2 x 3/8″
€0 P1326Module for 2 x aditional air channels. To be used with TA60-180 tool attachments.
-
TA60-180 Air module 4 x 3/8″
€0 P1326-4Module for 4 x aditional air channels. To be used with TA60-180 tool attachments.
-
TA60/TA120/TA180 Bus module Profinet (M12)
€0 P1347Module for Bus, Profinet. To be used with TA60-180 tool changers.
-
TA60/TA120/TA180 Power module 8 x power
€0 P1308Module for 8 x aditional power. To be used with TA60-180 tool changers.
-
TA60/TA120/TA180 Servo/Power module 8 x signals
€0 P1376Module for 8 x aditional servo/power signals. To be used with TA60, TA120 and TA180 tool attachments.
Note: The electrical module protrudes 1.6 mm below the tool flange. An adapter plate may be required for installation.
-
TA60/TA120/TA180 Signal module 12 x signals
€0 P1306Module for 12 x aditional signals. To be used with TA60-180 tool changers.
-
TA60/TA120/TA180 Signal module 12 x signals, with pin connection
€0 P1355Module for 12 x aditional signals. To be used with TA60-180 tool changers.
Note: The electrical module protrudes 1.6 mm below the tool flange. An adapter plate may be required for installation.
-
TA60/TA120/TA180 Signal module 17 x signals
€0 P1312Module for 15 x aditional signals. To be used with TA60-180 tool changers.
-
TA60/TA120/TA180 Signal module 8 x signals
€0 P1345Module for 6 x additional signals. To be used with TA60-180 tool changers.
-
TA60/TA120/TA180 Signal module M12 connector 17 x signals
€0 P1332Module for 17 x aditional signals. To be used with TA60-180 tool changers.
-
TC20 Air module 4 x M5 air
€0 P1115Module for 4 x aditional air channels. To be used with TC20 tool changers.
-
-
TC720 magnetic sensors open/close M8 for KUKA
€0 P7293To be used together with tool changer TC720 for KUKA
-
TC720 magnetic sensors open/close M8, (only for gen 3 tool changers)
€0 P7174To be used together with tool changer TC720 gen 3