• Extended small valve unit with 2x valves (for tool change)

    P0027
    • Extended small valve unit two valves
    • One valve is dedicated for tool change
    • The tool change valve shuts off the air to the other valves on tool change
    • Built in connection box for I/O signals
    • Standard ISO15407-2 18mm IE interface
    Add To QuoteDone

  • Extended small valve unit with 4x valves (for tool change)

    P0028
    • Extended small valve unit four valves
    • One valve is dedicated for tool change
    • The tool change valve shuts off the air to the other valves on tool change
    • Built in connection box for I/O signals
    • Standard ISO15407-2 18mm IE interface
    Add To QuoteDone

  • Extended small valve unit with 5x valves (for tool change)

    P0029
    • Extended small valve unit five valves
    • One valve is dedicated for tool change
    • The tool change valve shuts off the air to the other valves on tool change
    • Built in connection box for I/O signals
    • Standard ISO15407-2 18mm IE interface
    Add To QuoteDone

  • Large valve unit with 2x valves (for Tool changer)

    P0044A
    • Large valve unit two valves
    • One valve is dedicated for tool change
    • The tool change valves shuts off the air to the other valves on tool change
    • Built in connection box for I/O signals
    • Standard ISO01 26mm IE interface
    Add To QuoteDone

  • Large valve unit with 4x valves (for Tool changer)

    P0041A
    • Large valve unit four valves
    • One valve is dedicated for tool change
    • The tool change valves shuts off the air to the other valves on tool change
    • Built in connection box for I/O signals
    • Standard ISO01 26mm IE interface
    Add To QuoteDone

  • Large valve unit with 5x valves (for Tool changer)

    P0043A
    • Large valve unit five valves
    • One valve is dedicated for tool change
    • The tool change valves shuts off the air to the other valves on tool change
    • Built in connection box for I/O signals
    • Standard ISO01 26mm IE interface
    Add To QuoteDone

  • Tool system STC100-2 for ABB IRB4600-40

    TS131-401

    This tool system is used when tool changing capability and 2 pneumatic channels are required. It consists of a swivel tool changer, adaptation kit, hose package, valve unit and cabling. The valve unit contains one directional (mono-stable 5/2) valve and one tool change (monostable 2×3/2) valve. The hose package contains four air hoses in total.

    Add To QuoteDone

  • Tool system STC100-2 for ABB IRB4600-45/60

    TS132-401

    This tool system is used when tool changing capability and 2 pneumatic channels are required. It consists of a swivel tool changer, adaptation kit, hose package, valve unit and cabling. The valve unit contains one directional (mono-stable 5/2) valve and one tool change (monostable 2×3/2) valve. The hose package contains four air hoses in total.

    Add To QuoteDone

  • Tool system STC100-2E for ABB IRB4600-40

    TS131-402

    This tool system is used when tool changing capability, 2 pneumatic channels and 8 electric signals are required. It consists of a swivel tool changer, adaptation kit, hose package, valve unit and cabling. The valve unit contains one directional (mono-stable 5/2) valve and one tool change (monostable 2×3/2) valve. The hose package contains four air hoses in total.

    Add To QuoteDone

  • Tool system STC100-2E for ABB IRB4600-45/60

    TS132-402

    This tool system is used when tool changing capability, 2 pneumatic channels and 8 electric signals are required. It consists of a swivel tool changer, adaptation kit, hose package, valve unit and cabling. The valve unit contains one directional (mono-stable 5/2) valve and one tool change (monostable 2×3/2) valve. The hose package contains four air hoses in total.

    Add To QuoteDone

  • Tool system STC100-6 for ABB IRB4600-40

    TS131-403

    This tool system is used when tool changing capability and 6 pneumatic channels are required. It consists of a swivel tool changer, adaptation kit, hose package, valve unit and cabling. The valve unit contains 3 directional (mono-stable 5/2) valves and one tool change (monostable 2×3/2) valve. The hose package contains eight air hoses in total.

    Add To QuoteDone

  • Tool system STC100-6 for ABB IRB4600-45/60

    TS132-403

    This tool system is used when tool changing capability and 6 pneumatic channels are required. It consists of a swivel tool changer, adaptation kit, hose package, valve unit and cabling. The valve unit contains 3 directional (mono-stable 5/2) valves and one tool change (monostable 2×3/2) valve. The hose package contains eight air hoses in total.

    Add To QuoteDone

  • Tool system STC100-6E for ABB IRB4600-40

    TS131-404

    This tool system is used when tool changing capability, 6 pneumatic channels and 8 electric signals are required. It consists of a swivel tool changer, adaptation kit, hose package, valve unit and cabling. The valve unit contains 3 directional (mono-stable 5/2) valves and one tool change (monostable 2×3/2) valve. The hose package contains eight air hoses in total.

    Add To QuoteDone

  • Tool system STC100-6E for ABB IRB4600-45/60

    TS132-404

    This tool system is used when tool changing capability, 6 pneumatic channels and 8 electric signals are required. It consists of a swivel tool changer, adaptation kit, hose package, valve unit and cabling. The valve unit contains 3 directional (mono-stable 5/2) valves and one tool change (monostable 2×3/2) valve. The hose package contains eight air hoses in total.

    Add To QuoteDone

  • Tool System STC250-6E for ABB IRB5720-125/3,0

    TS141L-602

    This tool system is used when tool changing capability, six pneumatic channels and 18 electric signals are required. It consists of a swivel tool changer, adaptation kit, hose package, valve unit and cabling. The valve unit contains three directional (bi-stable 5/2) valves and one tool change (2×3/2-NO/NC) valve. The hose package totally contains eight air hoses.

    Note! Connector only for IRC5 robot controller.

    Add To QuoteDone

  • Tool System STC250-6E for ABB IRB5720-180/2,6

    TS141-602

    This tool system is used when tool changing capability, six pneumatic channels and 18 electric signals are required. It consists of a swivel tool changer, adaptation kit, hose package, valve unit and cabling. The valve unit contains three directional (bi-stable 5/2) valves and one tool change (2×3/2-NO/NC) valve. The hose package totally contains eight air hoses.

    Note! Connector only for IRC5 robot controller.

    Add To QuoteDone

  • Tool system STC250-6E for ABB IRB6700-150/3,20 & 175/3,05

    TS152L-602

    This tool system is used when tool changing capability, six pneumatic channels and 12 electric signals are required. It consists of a swivel tool changer, adaptation kit, hose package, valve unit and cabling. The valve unit contains three directional (bi-stable 5/2) valves and one tool change (2×3/2-NO/NC) valve. The hose package totally contains eight air hoses.

    Add To QuoteDone

  • Tool system STC250-6E for ABB IRB6700-155/2,85

    TS151L-602

    This tool system is used when tool changing capability, six pneumatic channels and 12 electric signals are required. It consists of a swivel tool changer, adaptation kit, hose package, valve unit and cabling. The valve unit contains three directional (bi-stable 5/2) valves and one tool change (2×3/2-NO/NC) valve. The hose package totally contains eight air hoses.

    Add To QuoteDone

  • Tool system STC250-6E for ABB IRB6700-200/2,60

    TS151-602

    This tool system is used when tool changing capability, six pneumatic channels and 12 electric signals are required. It consists of a swivel tool changer, adaptation kit, hose package, valve unit and cabling. The valve unit contains three directional (bi-stable 5/2) valves and one tool change (2×3/2-NO/NC) valve. The hose package totally contains eight air hoses.

    Add To QuoteDone

  • Tool system STC250-6E for ABB IRB6700-235/2,65 & 205/2,80

    TS152-602

    This tool system is used when tool changing capability, six pneumatic channels and 12 electric signals are required. It consists of a swivel tool changer, adaptation kit, hose package, valve unit and cabling. The valve unit contains three directional (bi-stable 5/2) valves and one tool change (2×3/2-NO/NC) valve. The hose package totally contains eight air hoses.

    Add To QuoteDone

  • Tool system STC250-6E for ABB IRB6700-245/3,00

    TS153L-602

    This tool system is used when tool changing capability, six pneumatic channels and 12 electric signals are required. It consists of a swivel tool changer, adaptation kit, hose package, valve unit and cabling. The valve unit contains three directional (bi-stable 5/2) valves and one tool change (2×3/2-NO/NC) valve. The hose package totally contains eight air hoses.

    Add To QuoteDone

  • Tool system STC250-6E for ABB IRB6700-300/2,70

    TS153-602

    This tool system is used when tool changing capability, six pneumatic channels and 12 electric signals are required. It consists of a swivel tool changer, adaptation kit, hose package, valve unit and cabling. The valve unit contains three directional (bi-stable 5/2) valves and one tool change (2×3/2-NO/NC) valve. The hose package totally contains eight air hoses.

    Add To QuoteDone