Swivel Tool Changer STC250-6E ALU
€0 P6306- For robot payload 250 kg
- Allows continuous rotation of axis 6
- Increased mobility
- Reduces hose package interference
- Maximizes hose package lifetime
-
-
TA20 Profinet module 8 x signals (M12 X-coded, 8 pin)
€0 P1164Module for 8 x aditional signals. To be used with TA20 tool attachments.
IMPORTANT! We do NOT recommend using this if your application requires POE (Power Over Ethernet). If this is the case, you can always contact support@robotsystemproducts.com for our help.
-
TA240-960 Bus module, Profinet interface
€0 P6775Module for Profinet bus. To be used with TA240 – TA960 tool attachments.
-
TA240-960 Signal module 17 x signals
€0 P6739Module for 19 x aditional signals. To be used with TA240 – TA960 tool attachments.
-
TA240-960 Signal module 23 x signals
€0 P6721Module for 23 x aditional signals. To be used with TA240 – TA960 tool attachments.
-
TA5 Signal module 8 x signals
€0 P1014Module for 8 x aditional signals. To be used with TA5 tool attachments.
-
TA5 Signal module 8 x signals (no filler)
€0 P1036Module for 8 x aditional signals. To be used with TA5 tool attachments.
-
TA60/TA120/TA180 Bus module (2 x M12 D-coded)
€0 P1369Module for Bus. To be used with TA60-180 tool changers.
Note: The electrical module protrudes 1.6 mm below the tool flange. An adapter plate may be required for installation.
-
TA60/TA120/TA180 Bus module DeviceNet
€0 P1329Module for Bus, DeviceNet. To be used with TA60-180 tool changers.
-
TA60/TA120/TA180 Bus module Ethernet IP
€0 P1341Module for Bus, Ethernet IP. To be used with TA60-180 tool changers.
-
TA60/TA120/TA180 Bus module Profinet (M12)
€0 P1347Module for Bus, Profinet. To be used with TA60-180 tool changers.
-
TA60/TA120/TA180 Signal module 12 x signals
€0 P1306Module for 12 x aditional signals. To be used with TA60-180 tool changers.
-
TA60/TA120/TA180 Signal module 12 x signals (3xM8-4P)
€0 P1382Module for 12 x aditional signals. To be used with TA60-180 tool changers.
-
TA60/TA120/TA180 Signal module 12 x signals, with pin connection
€0 P1355Module for 12 x aditional signals. To be used with TA60-180 tool changers.
Note: The electrical module protrudes 1.6 mm below the tool flange. An adapter plate may be required for installation.
-
TA60/TA120/TA180 Signal module 17 x signals
€0 P1312Module for 15 x aditional signals. To be used with TA60-180 tool changers.
-
TA60/TA120/TA180 Signal module 30 x signals
€0 P1339Module for 30 x aditional signals. To be used with TA60-180 tool changers.
-
TA60/TA120/TA180 Signal module 30 x signals, Souriau connector
€0 P1378Module for 30 x aditional signals. To be used with TA60-180 tool changers.
-
TA60/TA120/TA180 Signal module M12 connector 17 x signals
€0 P1332Module for 17 x aditional signals. To be used with TA60-180 tool changers.
-
TC20 Profinet module 8 x signals (M12 X-coded, 8 pin)
€0 P1163Module for 8 x aditional signals. To be used with TC20 tool changers.
IMPORTANT! We do NOT recommend using this if your application requires POE (Power Over Ethernet). If this is the case, you can always contact support@robotsystemproducts.com for our help.
-
TC20 signal module 12 x signals
€0 P1131Module for 12 x aditional signals. To be used with TC20 tool changers.
-
TC20 Signal module 8 x signals
€0 P1113Module for 8 x aditional signals. To be used with TC20 tool changers.
-
TC240-960 Bus module, Profinet
€0 P6771Bus module for Profinet. To be used with Moduflex tool changers TC240 – TC960.
-
TC240-960 Signal module 23 x signals
€0 P6711Module for 23 x aditional signals. To be used with Moduflex tool changers TC240 – TC960.
-
TC5 Signal module 8 x signals
€0 P1013Module for 8 x aditional signals. To be used with TC5 tool changers.
-
TC5 Signal module 8 x signals (M12, 8 pin)
€0 P1015Module for 8 x aditional signals. To be used with TC5 tool changers.
-
TC5 Signal module 8 x signals (no filler)
€0 P1035Module for 8 x aditional signals. To be used with TC5 tool changers.
-
TC5 Signal module 8 x signals, angled connector
€0 P1039Module for 8 x aditional signals. To be used with TC5 tool changers.
-
TC60/TC120/TC180 Bus module (2 x M12 D-coded)
€0 P1368Module for Bus. To be used with Modular tool changers TC60/TC120/TC180.
-
TC60/TC120/TC180 Bus module Ethernet IP
€0 P1340Module for Bus, Ethernet IP. To be used with Modular tool changers TC60/TC120/TC180.
-
TC60/TC120/TC180 Bus module Profinet (M12)
€0 P1346Module for Bus, Profinet. To be used with Modular tool changers TC60/TC120/TC180.