TA20 Profinet module 8 x signals (M12 X-coded, 8 pin)
Module for 8 x aditional signals. To be used with TA20 tool attachments.
IMPORTANT! We do NOT recommend using this if your application requires POE (Power Over Ethernet). If this is the case, you can always contact support@robotsystemproducts.com for our help.
Easy to customize
Tool changers and tool attachments in the Modular series are easy to adapt according to the application needs. This is thanks to the modular system where you can equip your unit with extra channels for electricity, air etc. Each module for the tool changer has a corresponding module for the tool attachment. Thanks to this, you have the flexibility to equip your robot with exactly what it needs.
| Signal type | |
|---|---|
| Signals total | |
| Signals available to tool | |
| Connector 1 | |
| Rated current | |
| Rated voltage | |
| IP Class | |
| Working temperature |
