Adaptation kit to S/STC20 for Kuka KR Cybertech
P4206Complete adaptation kit for installation of S/STC20 on Kuka KR Cybertech robot.
-
-
Adaptation kit to S/STC20 for Kuka KR30 L16
P4211Complete adaptation kit for installation of S/STC20 on Kuka KR30 L16 robot.
-
-
Hose package for CiRo to Fanuc CR-7iA/L and LR Mate 200iD
P2432For use with RSP:s CiRo application
-
Hose package to Fanuc M-20iA J3-J6
P2408IMPORTANT! This is a general solution. To ensure functionality with your specific application we always recommend that you contact our technical support before ordering this item. support@robotsystemproducts.com
-
Hose package to IRB1300 for CiRo
P2176Decreased wear, increased productivity Avoid being limited by worn out hose packages. We offer you hose packages that are easy to install, lasts long and provide a good protection of your hoses and cables. Combine our hose package with a Swivel or Swivel tool changer and you get a robot with full mobility of its…
-
Moduflex integrated valve with 3p M8 connector for TC240 and TC480
P6718For extra tool changer safety. To be used together with tool changer TC240 and TC480
-
Swivel S5-4-40-4-M6
P1026- For robot payload 5 kg
- Allows continuous rotation of axis 6
- Increased mobility
- Reduces hose package interference
- Maximizes hose package lifetime
-
TA60/TA120/TA180 Power module 8 x power, dual connectors, 1 m cable
P3313-10Module for 8 x aditional power. To be used with TA60-180 tool changers.
Note: The electrical module protrudes 1.6 mm below the tool flange. An adapter plate may be required for installation.
-
TA60/TA120/TA180 Power module 8 x power, dual connectors, 8 m cable
P3313-80Module for 8 x aditional power. To be used with TA60-180 tool changers.
Note: The electrical module protrudes 1.6 mm below the tool flange. An adapter plate may be required for installation.