Adaptation kit to CiRo S2 for Kuka KR6 R900 SIXX
P5306Complete adaptation kit for installation of CiRo S2 on Kuka KR6 R900 SIXX robot
-
-
Adaptation kit to CiRo S2 for Yaskawa/Motoman HP20
P5310Complete adaptation kit for installation of CiRo S2 on Yaskawa/Motoman HP20 robot.
-
Adaptation kit to CiRo S3 for Universal Robots UR10E
P5320Complete adaptation kit for installation of CiRo S3 on Universal Robots UR10E robot.
-
Axis 6 flexible hose bracket NW23 for 50-4-M6
P8242-1- For ISO9409-1-50-4-M6 interface
- Fits NW23 tubing
-
Axis 6 flexible hose bracket NW29 for 50-4-M6
P8242-2- For ISO9409-1-50-4-M6 interface
- Fits NW29 tubing
-
Axis 6 rigid hose bracket NW29 for 50-4-M6
P8243-2- For ISO9409-1-50-4-M6 interface
- Fits NW29 tubing
-
Hose guide with flexible mounting for NW29 (Ø110 – Ø150 mm)
P8241-3- Mounting suitable for Ø110 – Ø150 mm
- Fits NW29 tubing
-
Hose guide with flexible mounting for NW29 (Ø70 – Ø90 mm)
P8241-1- Mounting suitable for Ø70 – Ø90 mm
- Fits NW29 tubing
-
Hose guide with flexible mounting for NW29 (Ø90 – Ø110 mm)
P8241-2- Mounting suitable for Ø90 – Ø110 mm
- Fits NW29 tubing
-
Hose package for S/STC to Fanuc LR Mate 200iB and LR Mate 200iD
P2409Decreased wear, increased productivity Avoid being limited by worn out hose packages. We offer you hose packages that are easy to install, lasts long and provide a good protection of your hoses and cables. Combine our hose package with a Swivel or Swivel tool changer and you get a robot with full mobility of its…
-
Moduflex integrated valve with 3p M8 connector
P7710For extra tool changer safety. To be used together with tool changer TC240, TC480, TC720 and TC960.
-
Moduflex integrated valve with 4p M8 connector (for safety TC)
P7710-4For extra tool changer safety. To be used together with tool changer TC240, TC480, TC720 and TC960.
-
TA60/TA120/TA180 Signal module M12 D-coded + M12 L-coded
P3317Module for 4 power and 4 bus signals. To be used with TA60-180 tool changers.
Note: The electrical module protrudes 1.6 mm below the tool flange. An adapter plate may be required for installation.
-
TC60/TC120/TC180 Bus module (2 x M12 D-coded)
P1368Module for Bus. To be used with Modular tool changers TC60/TC120/TC180.
-
TC60/TC120/TC180 Signal module 2 x 9 signals, with socket connection
P1356Transfers 18 electrical signals to the tool. To be used with Modular tool changers TC60/TC120/TC180.
-
TC60/TC120/TC180 Signal module M12 D-coded + M12 L-coded
P3316Module for 4 power and 4 bus signals. To be used with Modular tool changers TC60/TC120/TC180.
-
Tool attachment STA20-4E (steel)
P0125For attachment of tool when using a swivel tool changer STC20. Made in steel, for higher load.
-
Tool attachment STA20-4E (steel)
P1137For attachment of tool when using a Swivel Tool Changer STC20. Made in steel, for higher load.
-
Tool attachment TA20-4 (steel)
P0123Steel version, for attachment of tool when using a tool changer TC20 or swivel tool changer STC20
-
Tool parking kit for TA20
P0142For tool parking of TA20 Tool attachment. Guide pins are included.