TA60/TA120/TA180 Bus module DeviceNet
€0 P1329Module for Bus, DeviceNet. To be used with TA60-180 tool changers.
-
-
TA60/TA120/TA180 Bus module Ethernet IP
€0 P1341Module for Bus, Ethernet IP. To be used with TA60-180 tool changers.
-
TA60/TA120/TA180 Bus module Profinet (M12)
€0 P1347Module for Bus, Profinet. To be used with TA60-180 tool changers.
-
TA60/TA120/TA180 High Voltage module
€0 P1323Transfers 2 high voltage power signals. To be used with TA60/TA120/TA180 tool attachments.
-
TA60/TA120/TA180 Power module 8 x power
€0 P1308Module for 8 x aditional power. To be used with TA60-180 tool changers.
-
TA60/TA120/TA180 Power module 8 x power, dual connectors, 1 m cable
€0 P3313-10Module for 8 x aditional power. To be used with TA60-180 tool changers.
Note: The electrical module protrudes 1.6 mm below the tool flange. An adapter plate may be required for installation.
-
TA60/TA120/TA180 Power module 8 x power, dual connectors, 8 m cable
€0 P3313-80Module for 8 x aditional power. To be used with TA60-180 tool changers.
Note: The electrical module protrudes 1.6 mm below the tool flange. An adapter plate may be required for installation.
-
TA60/TA120/TA180 Servo/Power module 8 x signals
€0 P1376Module for 8 x aditional servo/power signals. To be used with TA60, TA120 and TA180 tool attachments.
Note: The electrical module protrudes 1.6 mm below the tool flange. An adapter plate may be required for installation.
-
TA60/TA120/TA180 Signal module 4 signals (M8 4S) + Profinet (M12 4P)
€0 P3308Module for 4 electrical and 4 fieldbus signals. To be used with TA60-180 tool changers.
-
TA60/TA120/TA180 Signal module 4 signals (M8 4S) + Profinet (M12 4S)
€0 P3301Module for 4 electrical and 4 fieldbus signals. To be used with TA60-180 tool changers.
-
TA60/TA120/TA180 Signal module 12 signals – Souriau/M8
€0 P1370Module for 12 x aditional signals. To be used with TA60, TA120 and TA180 tool attachments.
-
TA60/TA120/TA180 Signal module 12 x signals
€0 P1306Module for 12 x aditional signals. To be used with TA60-180 tool changers.
-
TA60/TA120/TA180 Signal module 12 x signals (3xM8-4P)
€0 P1382Module for 12 x aditional signals. To be used with TA60-180 tool changers.
-
TA60/TA120/TA180 Signal module 12 x signals, with pin connection
€0 P1355Module for 12 x aditional signals. To be used with TA60-180 tool changers.
Note: The electrical module protrudes 1.6 mm below the tool flange. An adapter plate may be required for installation.
-
TA60/TA120/TA180 Signal module 17 x signals
€0 P1312Module for 15 x aditional signals. To be used with TA60-180 tool changers.
-
TA60/TA120/TA180 Signal module 19 signals
€0 P1390Module for 19 x aditional signals. To be used with TA60, TA120 and TA180 tool attachments.
Note: The electrical module protrudes 1.6 mm below the tool flange. An adapter plate may be required for installation.
-
TA60/TA120/TA180 Signal module 2 x 9 signals, Female thread connectors
€0 P1374This module has female threaded connectors and transfers 18 signals. To be used with TA60-180 tool attachments.
Note: The electrical module protrudes 1.6 mm below the tool flange. An adapter plate may be required for installation.
-
TA60/TA120/TA180 Signal module 2 x 9 signals, Male thread connectors
€0 P1357Transfers 18 signals. To be used with TA60-180 tool attachments.
Note: The electrical module protrudes 1.6 mm below the tool flange. An adapter plate may be required for installation.
-
TA60/TA120/TA180 Signal module 30 x signals
€0 P1339Module for 30 x aditional signals. To be used with TA60-180 tool changers.
-
TA60/TA120/TA180 Signal module 30 x signals, Souriau connector
€0 P1378Module for 30 x aditional signals. To be used with TA60-180 tool changers.
-
TA60/TA120/TA180 Signal module 8 x signals
€0 P1345Module for 6 x additional signals. To be used with TA60-180 tool changers.
-
TA60/TA120/TA180 Signal module M12 4S + M12 4P
€0 P3315Module for 4 electrical and 4 bus signals. To be used with TA60-180 tool changers.
-
TA60/TA120/TA180 Signal module M12 connector 17 x signals
€0 P1332Module for 17 x aditional signals. To be used with TA60-180 tool changers.
-
TA60/TA120/TA180 Signal module M12 D-coded + M12 L-coded
€0 P3317Module for 4 power and 4 bus signals. To be used with TA60-180 tool changers.
Note: The electrical module protrudes 1.6 mm below the tool flange. An adapter plate may be required for installation.
-
Water/Air module for TA Moduflex
€0 P7319Module for up to 4 x aditional air or water channels. To be used with Moduflex (TA240 – TA960) tool attachments.
Important! This unit includes our new generation air/water coupling. This is NOT compatible with the older version. If you need to retrofit, please contact support@robotsystemproducts.com
Select options This product has multiple variants. The options may be chosen on the product page