TA60/TA120/TA180 Signal module 2 x 9 signals, Female thread connectors
P1374Transfers 18 signals. To be used with TA60-180 tool attachments.
-
-
TA60/TA120/TA180 Signal module 2 x 9 signals, with pin connection
P1357Transfers 18 signals. To be used with TA60-180 tool attachments.
-
TA60/TA120/TA180 Signal module 30 x signals
P1339Module for 30 x aditional signals. To be used with TA60-180 tool changers.
-
TA60/TA120/TA180 Signal module 30 x signals, Souriau connector
P1378Module for 30 x aditional signals. To be used with TA60-180 tool changers.
-
TA60/TA120/TA180 Signal module 8 x signals
P1345Module for 12 x aditional signals. To be used with TA60-180 tool changers.
-
TA60/TA120/TA180 Signal module M12 4S + M12 4P
P3315Module for 4 electrical and 4 bus signals. To be used with TA60-180 tool changers.
-
TA60/TA120/TA180 Signal module M12 connector 17 x signals
P1332Module for 17 x aditional signals. To be used with TA60-180 tool changers.
-
TA60/TA120/TA180 Signal module M12 D-coded + M12 L-coded
P3317Module for 4 power and 4 bus signals. To be used with TA60-180 tool changers.
-
TC empty inductive sensor
P7145-1For extra tool changer safety. To be used together with tool changer TC240, TC480, TC720 and TC960.
-
TC empty mechanical sensor
P7288For extra tool changer safety. To be used together with tool changer TC240 and TC480
-
TC magnetic sensor open/close for TC60, TC120 and TC180
P1324For extra tool changer safety. To be used together with tool changer TC60, TC120 and TC180.
-
TC Moduflex pressure sensors (analog)
P7257AFor extra tool changer safety. To be used together with tool changer TC240, TC480, TC720 and TC960.
-
TC20 Air module 4 x M5 air
P1115Module for 4 x aditional air channels. To be used with TC20 tool changers.
-
TC20 Profinet module 8 x signals (M12 X-coded, 8 pin)
P1163Module for 8 x aditional signals. To be used with TC20 tool changers.
IMPORTANT! We do NOT recommend using this if your application requires POE (Power Over Ethernet). If this is the case, you can always contact support@robotsystemproducts.com for our help.
-
TC20 signal module 12 x signals
P1131Module for 12 x aditional signals. To be used with TC20 tool changers.
-
TC20 Signal module 8 x signals
P1113Module for 8 x aditional signals. To be used with TC20 tool changers.
-
-
TC240-960 Air module 8 x air
P6847Module for 8 x additional air channels. To be used with Moduflex tool changers TC240 – TC960.
-
TC240-960 Bus module, Profinet
P6771Bus module for Profinet. To be used with Moduflex tool changers TC240 – TC960.
-
TC240-960 Multi-module with Profinet
P6778Multi-module for signal, servo, resolver and Profinet bus. To be used with Moduflex tool changers TC240 – TC960.
-
TC240-960 Power module 3 x Power (with cable gland, separate conductors)
P6743Module for 3 x power. To be used with Moduflex tool changers TC240 – TC960.
-
TC240-960 Power module 3 x Power (with cable gland)
P6716Module for weld power. To be used with Moduflex tool changers TC240 – TC960.
-
TC240-960 Power module 3 x Power (with M50 cable gland)
P6784Module for weld power. To be used with Moduflex tool changers TC240 – TC960.
-
TC240-960 Power module 3 x Power (with MC-connector, RobiFix)
P6794Module for weld power. To be used with Moduflex tool changers TC240 – TC960.
-
TC240-960 Power module 3 x Power (with MC-connector)
P6717Module for weld power. To be used with Moduflex tool changers TC240 – TC960.
-
TC240-960 Power module 8 x Power (base)
P7325Module for weld power. To be used with Moduflex tool changers TC240 – TC960.
NOTE! Connectors will normally reduce maximum current. To utilize the full
amperage, connect cables directly using cable lugs! -
TC240-960 Servo module (M23 8 pin)
P6768-2Module with servo interface. To be used with Moduflex tool changers TC240 – TC960.
-
TC240-960 Signal module 17 x signals (3 x M8 connectors)
P6738-1Module for 17 x aditional signals. To be used with Moduflex tool changers TC240 – TC960.
-
TC240-960 Signal module 19 x signals (Souriau 26P + 3 x M8)
P7224Module for 19 x aditional signals. To be used with Moduflex tool changers TC240 – TC960.
-
TC240-960 Signal module 23 x signals
P6711Module for 23 x aditional signals. To be used with Moduflex tool changers TC240 – TC960.