Tool Changer TC240-1 ø125-10-M10 Prepered for safety
- Prepered for safety
- For robot payload 240 kg
- Modular design
- External signals
- Wide range of media modules – simple to customize
- Designed to meet bodyshop application demands
Important! This unit includes our new generation air/water coupling. This is NOT compatible with the older version tool attachment. If you need to retrofit, please contact support@robotsystemproducts.com
Tool changing ability for Tool changer TC240-1
The RSP tool changers are designed to maximize the flexibility and reliability of your robot fleet. They offer the possibility to enhance your robot application by allowing it to switch between different tools, such as grippers, weld units, fixtures etc. Tool changers from RSP are robust and can manage continuous changing operations with maintained reliability and safety. Depending on model and options, electrical signals, weld and servo power, data, water, and compressed air can be transferred from the robot side to the tool.
All our tool changers feature the patented locking device, TrueConnect™. It reduces play to the minimum and enables absolute alignment repeatability throughout its lifespan. With its unique design, it does not require exact alignment before docking with different tools. Find out more about the TrueConnect™ technology.
The Robot System Products “Prepared For Safety” concept includes preconfigured tool changers ready to be customized with our module for integrated safety. Please contact support@robotsystemproducts.com for more information about this.
| Mechanical interface | ISO 9409-1 125-10-M10 |
|---|---|
| Robot payload | 240 kg | 530 lb |
| Fz | ± 2400 N | ± 530 lb |
| Mz | ± 2000 Nm | ± 17700 lbf·in |
| Mx/My | ± 2400 Nm | ± 21000 lbf·in |
| Weight | 8.2 kg | 18.08 lb |
| Height | 60 mm | 2.36 in |
| Centre of gravity (Z) | + 38 mm |
| Air channels total | 1 |
| Air channels dedicated | 2 (TC open and TC close) |
| Air channels available to tool | 1, Additional channels can be added with external media module |
| Air connection, inlet | G 1/2″ (1x) |
| Max air pressure | 10 bar | 145 psi |
| Min air pressure | 6 bar | 87 psi |
| Air flow per channel | 2000 l/min | 70.6 CFM |
| Air quality | Oil-clean and waterless filtered air, with max 25µm particle content |
| Signals total | Depending on chosen signal module |
| Working temperature | +10°C – +50°C | 50 °F – 120 °F |
Modules
Saftey modules
Power modules
Air/Water modules
-
-
Water/Air module for TC Moduflex
P7318Add To Quote This product has multiple variants. The options may be chosen on the product page
Tool attachment
Related products
-
-
Tool changer TC120-8
P1401Add To Quote This product has multiple variants. The options may be chosen on the product page -
-
