Tool system STC20-4 for ABB IRB4600-20/2,5
This tool system is used when tool changing capability and 4 pneumatic channels are required. It consists of a swivel tool changer, adaptation kit, hose package, valve unit and cabling. The valve unit has three monostable 5/2 valves and the hose package contains 6 air hoses.
The complete package
With our tool systems you get it all: a complete combination of our products, adapted to your robot and your needs. An effective, flexible solution made to fit perfectly. The tool system is made easy to install, requires low maintenance and simplifies offline programming. Spend time on the application, and not on dressing the robot.
| Robot brand | ABB |
|---|---|
| Mechanical interface | ISO 9409-1-40-4-M6 |
| Working temperature | +10°C – +50°C | 50 °F – 120 °F |
| Fz | ± 200 N | ± 45 lb |
| Mz | ± 100 Nm | ± 900 lbf·in |
| Mx/My | ± 100 Nm | ± 900 lbf·in |
| Air channels total | 6 |
| Air channels dedicated | 2 (TC open and TC close) |
| Air channels available to tool | 4 |
| Air connection, outlet | Ø6 mm hose (4x) |
| Max air pressure | 10 bar | 145 psi |
| Air quality | Oil-clean and waterless filtered air, with max 25µm particle content |
| Valve size | ISO15407-2 18 mm |
| Valve type | 1 x Tool change valve 5/2 Monostable, 2 x Directional valves 5/2 Monostable |
| IP Class | IP 54 |
