CoboShift – Media Module for 8 x electrical signals (M8) – Tool side
P1180CoboShift Media Module
- For Tool Attachment
- Adds 8 x electrical signals
- M8 connector
-
-
Swivel S20-2E
P0111B- For robot payload 20 kg
- Allows continuous rotation of axis 6
- Increased mobility
- Reduces hose package interference
- Maximizes hose package lifetime
-
Swivel S20-6E
P0113B- For robot payload 20 kg
- Allows continuous rotation of axis 6
- Increased mobility
- Reduces hose package interference
- Maximizes hose package lifetime
-
Swivel Tool Changer STC20-2E
P1143- For robot payload 20 kg
- Allows continuous rotation of axis 6
- Increased mobility
- Reduces hose package interference
- Maximizes hose package lifetime
-
Swivel Tool Changer STC20-4E
P0108B- For robot payload 20 kg
- Allows continuous rotation of axis 6
- Increased mobility
- Reduces hose package interference
- Maximizes hose package lifetime
-
TA20 Profinet module 8 x signals (M12 X-coded, 8 pin)
P1164Module for 8 x aditional signals. To be used with TA20 tool attachments.
IMPORTANT! We do NOT recommend using this if your application requires POE (Power Over Ethernet). If this is the case, you can always contact support@robotsystemproducts.com for our help.
-
TA20 Signal module 8 x signals (0,6m cable)
P1114Module for 8 x aditional signals. To be used with TA20 tool attachments.
-
TA20 Signal module 8 x signals (1m cable)
P1114-1Module for 8 x aditional signals. To be used with TA20 tool attachments.
-
TA20 Signal module 8 x signals (M12, 8 socket)
P1156-3Module for 8 x aditional signals. To be used with TA20 tool attachments.
-
TA5 Signal module 8 x signals
P1014Module for 8 x aditional signals. To be used with TA5 tool attachments.
-
TA5 Signal module 8 x signals (no filler)
P1036Module for 8 x aditional signals. To be used with TA5 tool attachments.
-
TA60/TA120/TA180 Signal module 4 signals (M8 4S) + Profinet (M12 4P)
P3308Module for 4 electrical and 4 fieldbus signals. To be used with TA60-180 tool changers.
-
TA60/TA120/TA180 Signal module 4 signals (M8 4S) + Profinet (M12 4S)
P3301Module for 4 electrical and 4 fieldbus signals. To be used with TA60-180 tool changers.
-
TA60/TA120/TA180 Signal module M12 4S + M12 4P
P3315Module for 4 electrical and 4 bus signals. To be used with TA60-180 tool changers.
-
TC20 Profinet module 8 x signals (M12 X-coded, 8 pin)
P1163Module for 8 x aditional signals. To be used with TC20 tool changers.
IMPORTANT! We do NOT recommend using this if your application requires POE (Power Over Ethernet). If this is the case, you can always contact support@robotsystemproducts.com for our help.
-
TC20 Signal module 8 x signals
P1113Module for 8 x aditional signals. To be used with TC20 tool changers.
-
TC5 Signal module 8 x signals
P1013Module for 8 x aditional signals. To be used with TC5 tool changers.
-
TC5 Signal module 8 x signals (M12, 8 pin)
P1015Module for 8 x aditional signals. To be used with TC5 tool changers.
-
TC5 Signal module 8 x signals (no filler)
P1035Module for 8 x aditional signals. To be used with TC5 tool changers.
-
TC60/TC120/TC180 Signal module 4 signals + Profinet
P1399Module for 4 electrical and 4 fieldbus signals. To be used with Modular tool changers TC60/TC120/TC180.
-
TC60/TC120/TC180 Signal module 8 x signals (for TC sensors)
P1344Module for 12 x aditional signals. To be used with Modular tool changers TC60/TC120/TC180.
-
Tool system STC20-4E for ABB IRB1300-10/1,15 & -11/0,9
TS103-202This tool system is used when tool changing capability, 2 pneumatic channels and 8 electric signals are required. It consists of a swivel tool changer STC20-4E, adaptation kit, hose package, valve unit and cable. The valve unit has two monostable 5/2 valves and the hose package contains 2 air hoses.
-
Tool system STC20-4E for ABB IRB2600-1,65/1,85
TS104-202This tool system is used when tool changing capability, 4 pneumatic channels and 8 electric signals are required. It consists of a swivel tool changer STC20-4E, adaptation kit, hose package, valve unit and cable. The valve unit has three monostable 5/2 valves and the hose package contains 4 air hoses.
-
Tool system STC20-4E for ABB IRB4600-20/2,5
TS106-202This tool system is used when tool changing capability, 4 pneumatic channels and 8 electric signals are required. It consists of a swivel tool changer, adaptation kit, hose package, valve unit and cabling. The valve unit has three monostable 5/2 valves and the hose package contains 4 air hoses.
-
